Get matched with top woodworkers in Plover, WI

While carpenters and woodworkers perform similar tasks, their focus differs. A carpenter is typically responsible for the structural woodwork involved in construction, such as framing, installing sheathing, hanging kitchen cabinets, and installing trusses. In contrast, a woodworker handles more intricate and custom projects, like building custom furniture, installing wainscoting, and creating detailed interior trim and moldings. Based on these definitions, many woodworkers can perform the tasks of a carpenter, but it's always best to discuss your specific project with a professional to ensure they have the necessary skills.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Hiring a woodworker can be expensive, depending on the job, but it’s very often well worth the investment. Woodworkers are able to provide custom pieces of furniture and handmade construction to present a finished product that is exactly to your specifications. If you have a specific vision for a one-of-a-kind piece of furniture or home feature, the cost of hiring a professional woodworker is worthwhile. Plus, you’ll often get a higher quality product than what you could buy in stores for a fraction of the price.

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.