Best electricians near Mondovi, WI

Generally, you’ll want to keep between 60 and 70 feet between the generator and the transfer switch. There are a few reasons for this, including:

• The distance reduces the noise coming from the generator into your home.

• It increases efficiency because you won’t have a voltage drop from this short of a distance.

• Prevents carbon monoxide poisoning: keep at least 15 feet between your generator and an open window. 

That depends on your setup. If a circuit breaker already has GFCI protection, then everything connected to that specific circuit is being monitored. You don’t need additional GFCI outlets on that breaker.

However, if the breaker is not GFCI, then you should have GFCI receptacles for at-risk outlets nearby water sources, because they are not receiving protection. Breakers in a breaker box can vary between GFCI and non-GFCI. Look for GFCI labels on the breaker or try to find the breaker model number to look it up if you aren’t sure.

Typically, when a 3-way switch only works when one switch is on, this is one of the most telltale indicators that the switch has gone bad (although this could also be the result of faulty or loose wiring). To diagnose the issue, toggle each switch until the light comes on. Once it’s on, toggle each switch separately again; the switch that doesn’t turn the light off is the bad switch. 

Yes, electricians must be licensed, certified, and in most cases, insured. Licensing requirements vary by state and local municipality, but most U.S. municipalities require electricians to hold an electrical contractor’s license. It's always a good practice to confirm requirements with your local municipality. Even if licensing is not required in your area, hiring a licensed and experienced electrician often leads to a better end result.

A license is a legal requirement to operate a business and is necessary for pulling project permits. Certifications, on the other hand, are typically voluntary and demonstrate a certain level of expertise. In some cases, a certified electrician may send an apprentice or journeyman to perform the work, but they must operate under a primary electrician who holds the proper license.

Before hiring, you should verify the electrician's license, insurance coverage, and any third-party certifications. You can use Angi’s contractor licensing search to confirm a pro's license status. Additionally, businesses with the “Angi Approved” badge on our platform meet strict criteria, including having the required state and local licenses, passing a background check, and maintaining a high average rating.