Best drain cleaners near Lyndon, VT

It is generally not recommended to pour hot or boiling water down a drain to unfreeze pipes due to significant risks. In some cases, the sudden temperature change can cause more ice buildup or produce steam, which increases pressure and could cause the pipe to burst, leading to costly damage and potential burn injuries. While hot water might help with a partially frozen drainpipe, it is unlikely to thaw a completely blocked water pipe further down the system. Additionally, boiling water can damage plastic pipes over time. Safer and more effective methods include using a space heater near the frozen section or applying hot towels directly to the pipe.

For disposal clogs with standing water, use a sink plunger and place it over the garbage disposal drain. Push the sink plunger up and down the drain about six to eight times before lifting. If the sink drains, the clogged food particles are dislodged from the drain. If there’s still standing water, repeat the steps until the standing water clears out. 

Plumbers use a variety of tools to help unclog the toughest of drain clogs, but the most common tools they use are drain snakes and augers. They try a plunger or drain snake to start, then move to heavy-duty augers, and finally try using a hydro jetter to blast away the clog with high-pressure water. Hiring a plumber to unclog a drain costs $125 to $300, largely depending on the extent and location of the clog and which of these methods is best for clearing it.

Start by unscrewing the overflow valve, which is located on the wall of your tub between the floor drain and the tub spout. Gently insert a plumbing snake down into the pipe, move it back and forth, and pull it out. Remove any hair, debris, and soap scum that comes out with it. Repeat the process until the snake comes out clean, and then reinstall the cap on your overflow valve.