Best drain cleaners near Peacham, VT

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Yes—your local septic company can clean your septic leach lines with a sewer jetter, a device that pumps high-pressure water through the lines to blast out any clogs and scum buildup. Unless there’s a clog or blockage in the lines, however, you do not need to perform this maintenance regularly. Do not attempt to clean your own leach lines, as you could easily damage them, leading to very costly repairs.

Yes, short hair can clog a drain. While you might be tempted to blame the long-haired people living with you for a clogged drain, hair—no matter the length—can combine with soap scum and leftover shampoo to create a perfect storm of sticky mess that can cause your drain to slow down. 

A clogged air gap can cause a dishwasher not to drain. There are, however, other potential issues that can lead to improper drainage. For example, if you have attached the air gap to a garbage disposal and forgotten to remove the knockout plug, wastewater may backflow into the dishwasher. Check that the air gap is installed properly, and then look for clogs in the air gap and dishwasher filters.