Get matched with top drain cleaners in Groton, VT

While you don’t have to run out and immediately buy a new toilet at the first sign of a clog, if the toilet keeps clogging because it’s a low-flow or poorly designed model, a new toilet may be the way to go. If your toilet keeps clogging, you can try using less toilet paper, adjusting the fill valve, checking the toilet vent pipe on the roof, and using a toilet auger to make sure nothing is stuck in the pipe or trap.

It is generally not recommended to pour hot or boiling water down a drain to unfreeze pipes due to significant risks. In some cases, the sudden temperature change can cause more ice buildup or produce steam, which increases pressure and could cause the pipe to burst, leading to costly damage and potential burn injuries. While hot water might help with a partially frozen drainpipe, it is unlikely to thaw a completely blocked water pipe further down the system. Additionally, boiling water can damage plastic pipes over time. Safer and more effective methods include using a space heater near the frozen section or applying hot towels directly to the pipe.

As a general rule of thumb, it’s best to clean your linear drain every two to three months to prevent debris buildup. However, if you notice it draining slowly or an odor from your drainpipes, it’s best to clear the clogged drain and maintain it more often. If you let a clog go for too long, you may have to invest in the price of professional shower drain cleaning, which costs about $225.

If your washing machine drain is clogged, that isn’t a good sign. Unlike toilet drains or kitchen sink drains, there isn’t matter that is easily broken up with a plumbing snake, and more care is required. If you’re in an old house or have mineral-rich water, there could be a buildup inside the pipe. Either way, if the blockage isn’t obvious and doesn’t dislodge with a snake, you need to call a pro—otherwise, you risk damaging integral plumbing.