Best affordable plumbers near Washington, VA

Even though they’re modern-looking, easier to clean, can be hung at any height, and help save space compared to traditional toilets, wall-hung toilets have some downsides. They’re more expensive than standard toilets, sometimes by a few hundred dollars. They’re also difficult to install and may require major plumbing work to reroute the drain if the previous toilet was a floor-mount model.

This tight fit can make repairs more difficult. You’ll also have to consider where you can hang them and weight limit restrictions, so they may not be the best fit for every home.

The cost to pipe a sink depends on the location. Generally, you’ll spend somewhere from $150 to $500 installing plumbing under a kitchen sink and $200 to $800 installing plumbing under a bathroom sink. These costs could rise if you don’t have a plumbing hookup nearby and you have to reroute plumbing from outside of your kitchen or bathroom.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

While plumber’s tape is a great solution for many plumbing problems, there are some times when it’s not the right product for the job at hand. 

You shouldn’t use plumber’s tape on pipe connections in any of the following scenarios:

• When connecting PVC pipes

• If the pipe has wide threads, as water can still leak through the space between the threads

• If the pipe has very tight threads, as the tape would prevent a proper connection

• If the pipe threads are damaged, which would prevent the tape from providing a watertight seal

If your predicament is similar to any of these, a licensed plumber can help you solve the problem.