Get matched with top welders in Quantico, VA

Q: What questions should I ask a welder before hiring?

• <div><p>There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:</p><ul><li><p>Are you licensed and certified?</p></li><li><p>How long have you been in the welding business?</p></li><li><p>Do you commonly do the type of welding I need?</p></li><li><p>Do you offer any kind of warranty for your work?</p></li><li><p>Do you charge by the hour or by the project?</p></li><li><p>How long do you expect my welding project to take?</p></li><li><p>What steps do you take to minimize errors in your work?</p></li></ul><p></p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Quantico, VA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Quantico, VA

*The Angi rating for Welding companies in Quantico, VA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Quantico, VA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on April 16, 2026

Reviewed in April 2026
I’ve used Iron Rod for two projects. They re-wired for a new wall oven installation, discovered that the prior circuit breaker was incorrectly sized and fixed it. Second, they did a great job on a recent project to upgrade my main electrical panel, add a circuit and ensure safety on existing...
Iron Rod Electric LLC
Request a quote
Reviewed in May 2024
The company is very professional and have expertise in fireplace repair. Excellent company!
Livingston Construction
Request a quote
Reviewed in March 2023
He did some welding for my wheels on a large moving service. He did a very good job and no complaint. I was very happy with the service. He was very professional, on time, and had a good equipment.
NCR Mobile Welding
Request a quote
Reviewed in October 2022
I will definitely hire A&H Contracting for future work. They did a great job.
A&H Contracting, Inc.
Request a quote
Reviewed in January 2022
We needed an emergency repair for a road metal drain grate. Traffic on the road had to be stopped while repair was made. KK Welding did the repair on Christmas Day when the business was closed. They were courteous, prompt and reasonably priced. I would recommend them.
KK Welding & Erector, LLC
Request a quote
Reviewed in March 2020
Stay so far away!!! We hired Jonathan to fix a ridge vent leak we had when we moved into our new home. We planned on replacing the roof in a few years but wanted to hold off as we had a lot of move-in expenses so decided to Target the only real problem the roof currently had. We had been through...
Worldwide Roofing LLC
Request a quote
Reviewed in March 2019
Davis Welding Service was exceptional. I ordered a monogram family name sign and it turned out just how I pictured it. I was unable to pick it up so Davis Welding Service mailed it to me. This is a beautiful piece of art and I can’t wait to dispaly it in my new home. I highly recommend this...
Davis Welding Service
Request a quote
Reviewed in August 2018
Jarvis is a consummate professional. His dedication to his craft is artistry. I would highly recommend him for any welding, iron work or light cement repairs. A pleasure to deal with such a wonderful gentleman, service provider and craftsmanship second to none.
Vulcan Ironwork & Mobile Welding Co
Request a quote
Reviewed in February 2016
<p>The annual safety inspection for my 2001 Toyota Tacoma truck was due in January 2016. I had the inspection conducted at the state certified inspection station less than 2 miles from my home. I have used this auto repair facility for years and they know me well. However, because of the...
Bobbys World Welding Service Inc
Request a quote
Reviewed in October 2014
I was simply thrilled to find this little gem. They might not look like much but they have all the equipment and even more important the SKILL and EXPERIENCE to do artistic and hard to repair jobs. They knew exactly what had to be done and how to do it right. <br /> I had spent months looking...
IVEY WELDING
Request a quote

Find Welders in Quantico

Sunlight Welding LLC

5.0(

)

Serving Quantico, VA and surrounding areas

Approved

In business since 2024

Free estimates

Credit card accepted

"There was a mistake in building the rail, but sunlight welding did a fantastic job of fixing the issue and doing right by the customer. Great customer service and a guiding light of how to turn around a situation."

Response time3 hrs

6 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

CLC WELDING SERVICES, LLC

4.9(

)

Serving Quantico, VA and surrounding areas

Approved

In business since 2023

Credit card accepted

Offers commercial services

"Very professional. They were in my area and provided same day service. Highly recommend."

+27

Response time50 mins

Recommended by100%of homeowners

Request Quote

Charlie Ornamental LLC

4.8(

)

Serving Quantico, VA and surrounding areas

Approved

Super Service Award Winner

In business since 2004

Free estimates

Warranties offered

"Winston installed a beautiful wrought iron railing extending up two steps and ending on the concrete landing of our front porch. He came when he said he would come and completed the work as promised efficiently and meticulously. I will use him again if I need welding done."

+41

Response time2 days

Recommended by85%of homeowners

Request Quote

KK Welding & Erector, LLC

4.5(

)

Serving Quantico, VA and surrounding areas

Approved

In business since 2019

Free estimates

Small jobs welcome

"We needed an emergency repair for a road metal drain grate. Traffic on the road had to be stopped while repair was made. KK Welding did the repair on Christmas Day when the business was closed. They were courteous, prompt and reasonably priced. I would recommend them."

Response time12 hrs

Recommended by100%of homeowners

Serving Quantico, VA and surrounding areas

Approved

Super Service Award Winner

In business since 2025

Free estimates

Credit card accepted

"I was completely satisfied with the work done. They came out the same day I contacted them and carefully and completely finished the work. I would highly recommend Jose and his team."

Response time4 hrs

Response rate93%

4 neighbors recently requested a quote

Request Quote

Hibbards Welding & Mechanical

New to Angi

Serving Quantico, VA and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

Family owned and operated small business looking to grow. Have experience in sawmills, paper mills and shop settings. Steel fabricating, demo, precision maintenance and more. Contact us today!

Serving Quantico, VA and surrounding areas

In business since 2022

Free estimates

"It was a great experience"

Response time11 hrs

Recommended by100%of homeowners

Serving Quantico, VA and surrounding areas

In business since 2005

Free estimates

Credit card accepted

"John handled our aluminum fence install without delay. He walked the line with us first, made sure the layout matched what we wanted, and started right away. The panels went in clean, no gaps or uneven spots. He stayed on task and worked through until it was done. No talking in circles, no delays. The fence looks tight and secure. Glad we picked this crew."

+33

Recommended by94%of homeowners

Serving Quantico, VA and surrounding areas

In business since 2010

Free estimates

"
It was Professional and neat.

"

Recommended by100%of homeowners

Request Quote

American Welding Company

5.0(

)

Serving Quantico, VA and surrounding areas

In business since 1995

Free estimates

Credit card accepted

"American Welding is a top-notch company."

Response time10 mins

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 42

Welding questions, answered by experts

There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:

Are you licensed and certified?
How long have you been in the welding business?
Do you commonly do the type of welding I need?
Do you offer any kind of warranty for your work?
Do you charge by the hour or by the project?
How long do you expect my welding project to take?
What steps do you take to minimize errors in your work?

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

The Quantico, VA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Sara Coleman
•
Apr 6, 2026Apr 6, 2026
Journeyman Carpenter vs. Carpenter: Who to Hire for Your Project
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.
Paige Bennett
•
May 2, 2026May 2, 2026
7 Types of Farm Fencing and How to Choose the Best One
There are a lot of different types of farm fencing. Find the one that’s right for your property with our handy guide.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Wrought Iron Fence Repair
Discover who to hire to repair a wrought iron fence and handle iron fence repair. Compare pros, see the process, and hire with confidence today.