Get matched with top door pros in Mathews, VA

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

On average, the cost to install or replace bifold doors ranges from $100 to $300, making them one of the most inexpensive interior door options. The final price depends on several factors, including the door's material and design, with hollow core and solid core doors being on the lower end of the cost spectrum. A local door installer will likely charge between $40 and $90 per hour. While a skilled DIYer may be able to install bifold doors, as most come with the necessary hardware, the doors can be heavy, and improper installation can lead to misalignment issues.

You want plenty of room between your pre-hung door and the framing in your wall to allow for shimming to get the door into the perfect position, so aim for about 1 inch on the top and both sides. That means you should make your rough opening about 1 inch taller and 2 inches wider than your pre-hung door. You’ll then use shims to stabilize and level the door before installing it.

Yes, you can add a screen door to most door frames. The screen should be able to fit standard-size door frames, so unless you have an unusually sized door, you shouldn’t have an issue. Just make sure to properly measure the frame. When in doubt, it’s best to let a pro take care of this task for you so it’s installed correctly.