"Kevon is extremely knowledgeable and skilled at boiler and radiant heating troubleshooting and repair, able to keep an old system alive long enough to get a new one installed Doesn't try to sell a replacement when a repair is practical and justified Replacement quote is very competitive and proposes high quality products and components"
"They installed a mini split. The exterior placement of the compressor we were not happy with. They came back immediately and corrected the problem. We are happy with the results."
With Technical HVAC Design you are getting a company that thrives on excellence!! I have been in this industry for 10 years+ and started at the bottom as a laborer and worked my way to designing systems for homes. I take pride in being able to assist everyones needs whether emergency services, repairs, needing bids on new equipment, or an entire system install for a custom project.
"Expert Plumbing arrived on time. The tech was courteous and kept me informed about the job at hand as he worked. Chandler S. noticed the other (still functioning) shut-off valve was just as corroded and replaced as well at no cost! He did a great job installing the faucet, and went the extra mile working around an pre-existing installation issue. Chandler S. offered a heads up on a toilet issue we weren't aware of and answered our many questions then, and throughout the job. We were able to use a coupon with them, which was accepted with no problem at all. I would definitely recommend this company, and especially the plumbing tech, Chandler S.. I plan on using them again."
Expert Services Plumbing, Heating, Air and Electrical is a full-service home services company based in Orem, Utah, serving homeowners across most of Northern Utah, including Utah County and Salt Lake County - such as Orem, Provo, Lehi, Sandy, and Draper. From plumbing and HVAC to electrical repairs, our skilled technicians deliver top-quality work at honest prices.\nWhat sets us apart? We offer true 24/7 emergency service, 365 days a year — because leaks, outages, and breakdowns don't wait. Our technicians are known for being punctual, professional, and reliable, showing up on time and getting the job done right the first time.\nFor dependable plumbing, heating, cooling, and electrical service in Utah, call Expert Services today or visit www.expertservicesutah.com.
"AC system failed during a recent heat wave. I had 2 separate companies look at my system and inform me that I needed to replace both the inside and outside units due to a blown compressor, despite my AC system only being 3 years old. Not happy with the estimates, I called Larkin to get a 3rd opinion. Larkin provided me with some direction over the phone to try first in an effort to avoid the dispatch fee. I called back when that didn't work and Ryan came out that evening. After a thorough diagnostic look into my system, it was determined that I needed a new outside system. Price quoted was half of what I had previously received. They were over the following day and did another comprehensive assessment to ensure that a new system was in fact required. The outdoor system was installed and works great. I highly recommend Larking Heating & Cooling."
The average cost to replace or install a new HVAC system is around $7,500. However, the price can range from $5,000 to $12,500, depending on factors like the size of your home, the type and brand of the unit, and your specific heating and cooling needs. If you only need to replace certain components, the cost will be lower; for example, a new AC unit can cost between $2,200 and $5,500, while a new furnace costs $3,200 to $6,000. If additional work like new ductwork is required, the total cost could be as high as $22,000. It's best to contact a local HVAC company for an accurate quote.
Yes, most municipalities require a permit for propane boiler installation to ensure safety and code compliance. Permit fees vary by location and are often included in your installer’s quote, as they’ll handle the permitting process. Ensure that you always check local regulations before starting your project to avoid fines or delays.
Always consult your manual for specific pressure numbers. Many expansion tanks come pre-pressurized at a specific PSI range, anywhere from 12 to 40 PSI, designed for a range of home boilers. You should not have to pressurize an expansion tank yourself, only the boiler system. If your system has a tank that needs to be manually pressurized, this is generally a job for professionals and their tools.
Many utility companies and government programs offer rebates or incentives for the installation of high-efficiency propane boilers. These can offset upfront costs and improve your return on investment. Check with your local utility or installer for current offers. Incentives vary by state and provider, so exploring regional programs can help maximize your savings.
The most important sign of a boiler problem is something happening unexpectedly, which is why regular boiler maintenance is important. Unexpected problems can include strange smells, new leaks, and unexpected noises that your boiler wasn’t making before. Additionally, if a boiler keeps shutting off or can’t maintain a specific temperature range, it’s time to call in an expert.
The Daniel, UT homeowners’ guide to boiler installation services
From average costs to expert advice, get all the answers you need to get your job done.
Discover the average electric boiler installation cost, key price factors, and ways to save. Get transparent, expert-backed estimates for your project.
