Best drain pipe installers near Wilmer, TX

A two-way cleanout can help if there’s already a clog, but the best strategy to prevent one is by not rinsing grease, oil, or fat down your drains, not flushing or rinsing coffee grounds or egg shells down your drains, flushing only human waste and toilet paper (so no diapers, period products, bathroom wipes, or paper towels), and using drain guards on all of your drains.

Yes, chemical drain cleaners contain sulfuric acid and hydrochloric acid, both of which are not only dangerous to your health but also extremely caustic. Drain cleaners will corrode your pipes and could lead to destroyed drain lines, especially if the chemicals interact with the piping for long periods. Unfortunately, this extended interaction is likely if you’re dealing with a clog, as the drain cleaner will have just as much trouble as water does moving through your plumbing system.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Clogged pipes are one of the top signs your water heater is about to fail. Potential symptoms of excess sediment buildup include not enough hot water, leaks, unusual noises, low water pressure, and discoloration or odors in the water.