Get matched with top furniture refinishers in Tahoka, TX

Vinegar won’t strip the wood stain from your wood, but it can help remove a different type of stain. If you’re dealing with food stains or trying to remove water rings on your wood, you can use a little olive oil and vinegar (mixed equally) to remove those stains without stripping your actual wood stain. Just rub the solution in the direction of the wood grain, let it sit, and then wipe it away with a damp towel.

Yes, you can fill rotten wood with expanding foam. You may prefer using an expanding foam treatment instead of wood filler since the latter can take a long time to dry. It may also provide an easier solution when you’re dealing with smaller gaps. If you use expanding foam, allow it to cure for about 24 hours before you sand and prime it.

It takes the average person four to eight days to refinish a table. This sounds long, but the work time is only two to 10 hours. If you have prior experience, each step, including dipping, stripping, sanding, staining, painting, and sealing, can take just 30 minutes to complete. The wait time between each step results in a longer total time.

The difference between resurfacing and refinishing is that refinishing only works on solid surfaces that are in good condition, whereas resurfacing will restore a cracked or worn surface to its original, blemish-free state. Refinishing will leave you with a smooth and glossy surface you can’t get from resurfacing alone. If that’s the look you’re going for, contact a local concrete finishing contractor to achieve it.