Get matched with top flooring contractors in Overton, TX

No, squeaky floors do not always mean there is structural damage. The noise is often caused by friction from issues like loose floorboards, gaps between the subfloor and joists, or loose subflooring. While many squeaks are harmless, persistent or worsening noise could indicate a more severe problem. If you notice other signs of structural damage—such as soft or sagging floors, cracks running from the wall to the ceiling, or horizontal cracks in your foundation—it's best to have a professional inspect your floor to determine the root cause.

The fastest way to remove carpet is to remove carpet in strips instead of trying to remove it in one large piece. Wear protective equipment such as gloves and goggles, use a utility knife to cut the carpet in long strips, and then pull at the edge of the strip to loosen the staples or glue. Carpet-cutting razor blades are best on your utility knife for the quickest removal.

Yes, carpeted stairs are generally considered safer than stairs with hard surfaces like wood, vinyl, or tile. Carpet provides more traction and friction, which helps reduce the chances of slips and falls. Additionally, if a fall does occur, carpet offers more cushioning, which can lessen the severity of an injury. While hard surfaces can look great, they are often more slippery. However, it's worth noting that some carpets, especially if they are new, dirty, or have a slick texture, can also pose a slipping hazard. To improve safety on any type of stair surface, you can add traction treads to increase grip.

There are a few different types of finishes to choose from for the final step of the project. 

Water-based polyurethane sealants emit fewer odors and fumes but dry quickly, which can pose a challenge when trying to get a smooth coat. Oil-based polyurethane sealants let out more odors and fumes into the air (it’s especially important to wear a respirator if you choose this type), but they take longer to dry, which can be more forgiving during the finishing step. 

Some may prefer wood oil to polyurethane because rather than creating a layer, it becomes part of the wood. Wood oil takes longer to dry, and is less resistant to wear and tear; however, it creates a natural-looking result by enhancing the grain of the wood.