Best drain cleaners near Manor, TX

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If your dishwasher isn’t draining, some common causes include a clogged drain filter, drain hose, or air gap. Also, if you have a garbage disposal, a clog in the disposal can back up your dishwasher since they share plumbing, as can a clog in your kitchen sink’s plumbing. A handy DIYer may be able to figure out how to unclog a dishwasher, but you may need to call in a plumber if you can’t locate and clear the clog yourself.

Snaking a drain can take as little as a few minutes for small, simple clogs, up to two hours or more for tough clogs located further down the drain line. For tougher clogs, a professional drain cleaner can likely get the job done much more quickly because they have the necessary tools and expertise. However, your drain cleaning pro might not be able to give you a firm time estimate until inspecting the clog and its surrounding plumbing.

The cost to clean a sewer line is about $370, ranging from about $190 to $550 on average. The specific cleaning method and the problem's severity will impact the project's overall cost. Some of the most common sewer line cleaning methods include:

• Snaking or rodding: $100–$250

• Hydrojetting: $350–$600

• Chemical treatments: $600–$1,000

• Repair or replacement: $1,000–$7,500