Get matched with top door pros in Huffman, TX

The width of your door jamb should match your wall thickness exactly, so it depends on your wall. For standard door openings, the width is equal to the width of a 2-by-4-inch  stud, plus the width of the drywall on both sides—about 1/2 inch each—which comes out to 4 9/16 inches. Block walls and framed walls that use 2-by-6-inch framing require a door jamb that’s 6 9/16 inches. You should always measure your finished wall thickness to get an accurate width for your door jamb material.

As long as you do it carefully, you can sand and restain hollow core doors. However, it’s risky because the veneers on hollow core doors are so thin that sanding and restaining might cause damage to the doors. If you do move forward with this project, sand the doors lightly with a medium-grit sandpaper.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.

WD-40 can temporarily silence a squeaky door hinge, but it is not recommended as a long-term solution. While it is effective at breaking down rust and grime, it contains very little lubricant and evaporates quickly. Using WD-40 can also attract dirt and dust to the hinges, which may cause more wear and tear over time. For a more lasting fix, after cleaning the hinge, apply a true lubricant. Better options include silicone spray, white lithium grease, metal or plastic lubricants, or oil-based products like petroleum jelly.