Get matched with top door pros in Eustace, TX

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.

You might be able to turn a normal door into a fire-rated door, but you’re better off purchasing one that meets all NFPA 80 standards. If you want to DIY a normal door into a fire door, you’ll need a self-adhesive intumescent seal, metal hinges, fire-resistant glazing, and a self-closing device, but you’re always better off buying a certified fire door.

Most of the time, a squeaky door is the result of dry hinges, where metal parts rub together without enough lubrication. Dirt, dust, or rust can also build up inside the hinge and add to the friction. Loose screws or slight misalignment can shift things just enough to create that irritating squeaking noise. Worn-out hinges or swelling wood from humidity changes can also be part of the problem on older doors. A good cleaning and proper lubrication usually take care of it, but if the squeak sticks around, it’s worth checking for bigger issues with the hinges or alignment. 

Standard door sizes aren’t one-size-fits-all, but there are common go-to dimensions. For exterior doors—like your front door—36 inches wide by 80 inches tall is typical, though you’ll see 30- or 32-inch widths too, especially in older homes. Interior doors vary more. Bedrooms and bathrooms often use 30- to 32-inch widths, and closet doors can be anything from slim singles to wide bi-folds. Height is usually 80 inches across the board; however, always measure your actual opening. “Standard” only works if it matches what’s already in place.