Get matched with top bathtub restoration pros in Woonsocket, SD

Rust in your bathtub occurs when iron in the water or on metal components in your tub are exposed to oxygen, but while it’s unsightly, it won’t make bathing dangerous. However, if the rust appears under or around your tub spout or shower head, it could indicate that you have high levels of iron in your water. Drinking water with small amounts of iron in it usually doesn’t pose a health risk, but you might want to consider installing a water softener. The presence of iron could indicate that you have hard water, which can create some plumbing issues.

There are a few ways to check whether your tub is fiberglass or acrylic. If your tub is a color other than white, then your tub is likely acrylic (as fiberglass tubs are usually white). Check to see if there is discoloration on the bottom of the tub, because if it’s yellowed, then you can be fairly sure it’s fiberglass.

Also, fiberglass tubs have thinner edges and are cool to the touch. Acrylic, on the other hand, is either room temperature or warm to the touch.

Bathtub refinishing costs an average of $460 and includes removing the finish, sanding or acid etching the surface, priming it, and applying an epoxy coating. After the coating cures, the bathtub should look as good as new, and the finish should last between seven and 10 years. Because bathtub refinishing requires hazardous chemicals, you should call a bathtub refinisher to do the job.

Yes, you can use a dremel tool to cut plexiglass. Follow the instructions under “How to Cut Plexiglass with a Saw,” and use a dremel tool with a 561 bit instead of a saw.