Q: How hard is it to resurface countertops?

• <div><p>Resurfacing countertops is relatively easy&mdash;especially for a pro. During this process, a countertop contractor will sand down or remove the existing countertop surface, make repairs, and then add a new surface or special coating. In certain instances, like if you use a laminate countertop coating system, it&rsquo;s an attainable DIY for beginners.</p></div>

Question 1

How hard is it to resurface countertops?

Accepted Answer

•

Resurfacing countertops is relatively easy—especially for a pro. During this process, a countertop contractor will sand down or remove the existing countertop surface, make repairs, and then add a new surface or special coating. In certain instances, like if you use a laminate countertop coating system, it’s an attainable DIY for beginners.

Question 2

Which is better—an acrylic or fiberglass tub?

Accepted Answer

•

Of the two most common and affordable bathtub materials, acrylic is notably better. Though fiberglass is cheaper, it is also more prone to scratching, chipping, fading, and cracking. Acrylic holds up better to wear and tear, cleaning, and sun exposure; the slight cost increase is usually worth the increased longevity.

Question 3

How do you clean an air bath?

Accepted Answer

•

Surprisingly, cleaning an air bath is almost as easy as relaxing in one. Most air baths have a self-cleaning or drying cycle to remove moisture from the inner tubing. This prevents mold and keeps the tub ready for your next soaking session. For deeper cleaning, use mild soap and a soft cloth to wipe the surfaces and periodically clean the air jets as the manufacturer recommends.

Question 4

What causes holes in a bathtub?

Accepted Answer

•

While tubs are fairly sturdy, you may notice cracks or holes. This kind of damage can happen from someone accidentally dropping something heavy into the tub. You might also see damage if you drop something heavy into the tub over and over again (like your extra large bottle of body wash). While you might only notice a small dent at first, this can later turn into a crack or a hole.

Also, certain cleaners that are harmful to your tub can cause damage. And if you have a fiberglass tub, you might see cracks if it was not installed properly with the right support.