Get matched with top bathtub restoration pros in Mitchell, SD

Acrylic tubs are extremely durable and rarely chip or crack. Even when frequently used, tubs made with this material are largely resistant to damage. However, damage may occur as the tub ages. They can also crack from damage from heavy objects and cleaners or a lack of support.

Refinished bathtubs typically need to be refinished every five years or so. Frequent cleaning and use will break down the finish and make cracks and chips appear more readily. Cracks and chips tend to grow once they begin unless they are repaired immediately. Ideally, you should refinish your bathtub before it gets old enough that refinishing isn’t worth the hassle.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

Bathtubs chip for a number of reasons. The primary cause is simply an accumulation of accidents or direct impact from objects over time. Heavy items will do this, like an iron, but so will lighter objects, like shampoo bottles, especially if you drop them from high enough.