Get matched with top garage pros in Kyle, SD

It’s possible to use a torch to melt ice on your garage door, but we don’t recommend it. It’s very easy to bring the flame too close to the door, which can melt the weather stripping or even the garage door itself. You’ll melt ice quickly with a torch, but the damage you’re likely to cause can end up costing you a few hundred dollars to fix, which isn’t worth it. Instead, we recommend pouring hot water over the frozen area or using a less intense heat source, like a hair dryer or space heater.

A prefab, or prefabricated garage, requires far less construction work than one with a foundation and frame, but it’s not nearly as desirable and may not be a worthwhile option. A prefabricated garage won’t be as durable or long-lasting, and it doesn’t provide the same protection for your belongings and vehicles. Plus, you can use a standard garage for more uses—like living space—whereas a prefab garage only serves as a space for storage. Lastly, building a traditional garage will add to your home value, while a prefab garage usually won’t.

We recommend hiring a garage door professional to install a garage door opener for you. Garage door openers aren’t terribly complex, but setting them up properly, setting the lift and drop speed, and installing sensors that work correctly can take a few hours for a DIYer. The cost to install a garage door opener is around $400, and it will save you a lot of time and frustration. Garage professionals have the skills and equipment necessary to work with potentially dangerous garage door components, like springs.

While it depends on door condition, the painter’s level of expertise, and weather conditions, it’s safe to set aside two to three days to complete this project, especially if you anticipate adding multiple coats of paint, which can take eight to 12 hours to dry. Your professional should be able to provide an estimate for the project timeline.