Get matched with top electricians in Jefferson, SD

A 60W LED bulb is likely labeled as “60W replacement” on the package—that’s because it provides about the same light output as a 60W incandescent bulb. In reality, it likely uses less energy—usually 15 watts or less. If that’s the case, then it’s perfectly fine to put a 60W LED bulb in a 40W socket. Your best bet is to read the package carefully. It will tell you the LED bulb’s actual wattage, and as long as it’s lower than the fixture, the bulb will be safe to use.

There are many signs it is time to replace an electrical panel, starting with flickering lights. Other tell-tale signals include overheating appliances, light fixtures that cause an electric shock, hissing or crackling from the breaker box, burned or blackened spots near the breaker box, and breakers that trip whenever activating power-hungry appliances like microwaves.

You can determine whether you have a double-pole switch by examining its wiring. Unlike single-pole switches, which have two brass-colored terminals, double-pole switches feature four. These switches are typically only found near high-powered appliances such as electric furnaces or water heaters. If you’re unsure what type of switch you have, contact a local electrician to confirm.

You should never use a plug with burn marks because it can cause a fire or even an electrical shock. The burn marks could be caused by a dangerous underlying electrical problem, so it’s important to call a qualified electrician right away.