Get matched with top energy efficiency auditors in Avon, SD

Generator size requirements vary wildly among properties, but typical generator sizes are listed below based on home square footage:

• 1,000 sq ft: 6–9 kW

• 1,500 sq ft: 7–10 kW

• 2,000 sq ft: 10–14kW

• 2,500 sq ft: 12–16kW

• 3,000 sq ft: 16–20kW+

Unfortunately, home square footage isn’t always a good indicator of generator size requirements. Instead, you should call in a professional to discuss which items in your home you’d like to run via your generator. They can calculate peak and average consumption for those items and then size your generator appropriately for optimal performance.

Hawaii is currently rated as the most expensive state for utilities. How much are utilities for a house in Hawaii? With electricity costs in Hawaii totaling nearly 42 cents per kilowatt-hour, residents are paying more to run their households than any other residents. Electricity costs in Hawaii are so high, mostly due to the fact that most of the electricity available to residents is produced using oil that must be shipped in from other places.

R-value is a measurement that dictates how much resistance an insulation material has against heat flow—or how well it can stop heat from coming and going. A higher R-value, which is attributed to thicker and more dense materials, means the better the insulation performs. There is not one universal recommended value. It depends on climate zones. For example, Alaska, which has a naturally cold and arctic climate, has higher R-value recommendations than the hot and humid Hawaii.

If you install LED bulbs, they will use much less energy than incandescent bulbs. LED light strips also use less power. Battery-operated puck lights use no electricity at all, but you will need to replace the batteries as needed. They are beneficial if your power goes out, too, as they will remain on as a light source.