Get matched with top cabinet makers in Avon, SD

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

While most kitchen island installations do not require a permit, some situations do. Any major kitchen renovation will require one, and depending on your municipality, you might also need one if you install new plumbing or electrical work. 

Your kitchen island installation pro will be able to determine if you need a permit for your job, which can run you between $460 and $2,900, depending on the permits required.

For safety when installing a vanity, attaching the vanity to the wall is ideal to prevent it from moving. Typically, sinks must be 4 inches away from bathtubs. Also, most states require that you have 21 inches in front of a sink, but the National Kitchen and Bath Association (NKBA) recommends 30 inches for more comfort.

Installing cabinet toe kicks after installing flooring is common, as this produces a sleek, streamlined appearance along the cabinetry bases. The toe kick is a cabinetry term for the covered, recessed areas at the cabinet’s base that let you stand closer to the counter more comfortably by making room for your toes.