Top-rated stucco pros.

Get matched with top stucco pros in Saint Stephen, SC

Enter your zip and get matched with up to 5 pros

Need a pro for your stucco service project in Saint Stephen, SC?

Select your specific project to find the pro for you.

Find Stucco pros in Saint Stephen

All American House Doctors, Inc.
1.0(
2
)
Synthetic Stucco - Install or Completely ReplaceTraditional Stucco - Install or Completely ReplaceTraditional Stucco - Repair or Partially Replace

Serving Saint Stephen, SC and surrounding areas

In business since 1981

Free estimates

Emergency services offered

A family owned and operated business serving Charleston since 1981. We are flexible and emphasize quality of craftsmanship with special emphasis on planning for superb design!

Recommended by100%of homeowners
Stucco questions, answered by experts

To maintain stucco, inspect it annually for cracks and clean the surface with a mild detergent. Seal any cracks promptly to prevent water infiltration, and reseal or repaint as needed to preserve its appearance.

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

Masonry screws are the best option to be used on stucco. They’re thicker and made to penetrate harder surfaces like concrete and cinder blocks. Fluted masonry screws work the best because they create a stronger grasp thanks to the lines on their shafts. If you’re working on exterior stucco, use galvanized screws to prevent corrosion.

The cost to replace the chimney crown or top is about $1,550 on average. The range varies widely depending on the size of the chimney, the materials used, accessibility, and the extent of the damage. If you suspect a problem with your chimney top, call a professional masonry contractor for an inspection. 

You can use small bits that are up to 3/8 inch in diameter, or larger bits that are 1/2 inch or more in diameter. Make sure the bits you use are coated with carbide or diamond; this information is usually visible on the package. You can also use hole saw bits to drill into stucco.

The Saint Stephen, SC homeowners’ guide to stucco services

From average costs to expert advice, get all the answers you need to get your job done.