Get matched with top pavers and hardscaping pros in Wilcox, PA

On average, concrete costs less than pavers for the same project. Standard broom-finished concrete costs from $2 to $15 per square foot. Stamped concrete costs between $8 to $28 per square foot. On the other hand, pavers cost from $8 to $50 per square foot. For any of these materials, the cost depends on which concrete finish or paver you choose. Keep in mind that the layout complexity, amount of site preparation, and location factor into the cost, too.

If pavers are uneven but not sunken, lift the affected bricks and check the bedding sand underneath. In many cases, simply smoothing out or adjusting the sand is enough to level them. Add or remove small amounts as needed, then press the pavers back into place and tap them with a mallet until they sit evenly with the surrounding surface.

Whether it's worth it to install a heated driveway depends on how often you'll use it, your lifestyle, and your budget. If you live in a mild climate with little snowfall, then installing a built-in heated driveway system may not be worth it. If you live in a region that experiences mild snowfall, then a portable mat could work better. However, if you live in a region with heavy snowfall, it makes sense to invest in a built-in heated driveway. 

Gravel is one of the few driveway materials that can handle rain the second it’s installed. Unlike asphalt, which needs days to set, or concrete, which requires weeks to cure, gravel is ready as soon as it’s compacted. It’s naturally permeable, allowing water to drain straight through—with no risk of pooling or surface damage. Gravel driveways are one of the most affordable, at $1 to $3 per square foot, and can also last upward of 100 years.