Get matched with top pavers and hardscaping pros in Coudersport, PA

Whether you decide to DIY paver installation or want to hire a pro, it’s smart to understand the process. First, you’ll need to prepare the area by clearing away grass and dirt. Next, you’ll add the paver base of gravel and sand before laying the pavers on top. You may need to cut pavers to fit your space or the landscaping design and add edging stones.

You should contact your driveway installer before winterizing a newly installed driveway. Winterizing it before the asphalt or concrete has fully cured can damage the driveway. But in many cases, you don't need to winterize a newly installed driveway anyway since it's likely freshly sealed and won't have much damage yet. 

Driveway aprons range between 15 and 18 feet long and 12 and 24 feet wide. However, both measurements depend on the width of your driveway and the distance between the end of the driveway and the road. In some cases, you will not be responsible for any apron that goes beyond the sidewalk, but it depends on local laws.

You can walk on newly sealed pavers as long as they’ve had enough time to dry and cure—typically after 24 hours for patios and walkways. Even so, don’t rush it. Humidity, temperature, and the type of sealant you use can stretch that window up to 72 hours. Rushing it can leave footprints or even damage the finish, especially if the surface hasn’t fully hardened. For driveways, wait at least three full days before parking or driving over them. Always check your sealant label for the most accurate timeline, since not all products cure the same way.