Get matched with top roofers in Weatherly, PA

Re-roofing is the process of placing a layer of shingles over top of existing shingles, rather than pulling out those shingles and replacing them. Compared to a full roof replacement, re-roofing typically costs less and requires less labor and time. It's not an option for everyone, though. You may need a full roof replacement if your roof already has more than one layer of shingles. A full replacement may also be necessary if your roof has extensive damage.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

A roof replacement can take anywhere from one to 14 days. For most homes, a full replacement that includes tearing off old materials takes about one to two days, though the average project can last up to 12 days. The exact timeline depends on several factors, including the roof's size and complexity, the type of roofing material, the crew size, and weather conditions. Certain materials take longer to install; for example, metal roofs can take seven to 14 days because the material is more difficult to work with than asphalt shingles, wood, or tile. A re-roofing project, where new shingles are installed over old ones, can take half the time or less. It's also important to factor in the time needed to obtain necessary permits. A professional roofing contractor will typically complete the job faster than a DIY approach.

The green coloration that develops on copper roofs is called a “patina,” and it’s a result of mild oxidation on the surface. The oxidation process is not harmful to your roof. In fact, the surface corrosion acts as a protective layer and won’t spread to the core of your copper roof materials. The discoloration will progress much more quickly in damp or humid climates than it will in dry climates. If you don’t like the green color, you can seal your roof to preserve the shiny, rose-gold look.