Get matched with top window pros in Conway, PA

There are a few reasons your crank windows might not close. First, determine if your window crank is working properly and opening and closing the window when you turn it. If it’s not, the crank may need replacing, cleaning, or lubricating. Another reason your windows aren’t closing could be dirt and debris in the window hinges or sash. Finally, make sure your window lock operator is set in the unlocked position and isn’t blocking the window from fully closing. If you’re still having trouble closing your window, it may be worth consulting a local window contractor.

You should avoid using abrasive materials and harsh chemicals when cleaning windows. Abrasive tools like scrubbing pads, rough cloths, or steel wool can permanently scratch and damage the glass. Harsh chemical cleaners containing alcohol or ammonia can damage window treatments, frame materials, and special features like tinting. It is also best to use distilled or filtered water instead of hard water, which can leave spots or streaks. For best results, use a clean microfiber cloth to wash the glass and old black and white newspapers to dry it without leaving streaks.

On average, bay windows are three times as expensive as a standard double-hung window, so up-front cost is a major drawback. They also let in more natural light than most other types of windows, which can be a positive thing, but it can also lead to more aggressive fading and UV damage to furniture and flooring. Larger windows allow for more heat transfer, so bay windows tend to be less energy-efficient due to their size. Finally, window treatments for bay windows can be more challenging to find, and they’re more expensive than those you’d place over standard-sized windows.

Yes, you can replace the frame around a window by completing either a partial replacement or a full replacement. With a partial replacement, your window specialist will remove the trim around the window and replace or repair just the damaged portion. For a full replacement, your tech will need to remove the window, replace the frame, and then reinstall the window.