Best fencing pros near California, PA

Split rail fencing is a type of post and rail fencing. Other post and rail fences include corral board and post and dowel. Post and rail fencing is the term used for any type of fence with vertical posts, horizontal rails, and nothing else (specifically excluding pickets). So, technically, a split rail fence is a post and rail fence.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

The average lifespan of a wood fence is 15 to 20 years, but some can last for 40 years or more depending on several factors. The type of wood is crucial; for example, untreated pine may only last 5 to 10 years, while pressure-treated pine can last up to 20 years, and cedar's natural resistance can extend its life to 40 years. Other factors include local weather conditions, with wet and windy climates causing faster deterioration, and the quality of maintenance. Higher-end wood, metal posts, and privacy fence styles also tend to last longer.

If you’re looking for a budget-friendly fence material, corrugated metal could be the answer. Metal fences cost about $7 to $32 per foot. Aluminum corrugated metal tends to be less expensive than steel. Both options are similar in cost to wood, so, depending on the type of wood you are considering, corrugated metal could be better for your budget.