Best fireplace pros near Keno, OR

No. Pellet stoves are specifically designed to burn manufactured wood or biomass pellets. Attempting to burn other materials, such as regular firewood or paper products, can damage the stove, compromise its efficiency, and even pose safety hazards due to inconsistent combustion and increased emissions. It's crucial to follow manufacturer guidelines and only use pellets that are specifically recommended for your pellet stove model to ensure safe and optimal performance over its life span.

A liter of bioethanol costs $11 and burns for around four hours, making it cost around $2.75 per hour to keep your bioethanol fireplace running. For comparison, natural gas costs around $0.50 per hour, and propane costs around $1.60 per hour. 

How much it costs you to run your bioethanol fireplace largely depends on how often you use it. Hypothetically speaking, if you run your fireplace for four hours a week year-round, you’ll go through one liter of biofuel per week or about $570 per year to run the fireplace.

The time required for a chimney inspection depends on the inspection level. A Level 1 inspection typically takes between 45 minutes and two hours, with an average of about an hour and a half. A Level 2 inspection usually takes less than two hours. A more in-depth Level 3 inspection can take up to five hours, or even multiple days if it requires removing materials. The total duration also depends on the chimney's size, condition, and how long it has been since its last inspection; chimneys with severe damage will require a longer inspection.

There are several ways to determine if your chimney or fireplace damper is open or closed. A simple method is to check for airflow by placing your hand near the fireplace opening; if you feel a draft or hear wind whistling, the damper is open. An open damper might also make the room feel cooler, similar to the outdoor temperature, or cause your HVAC system to work harder than usual. For a more definitive test, you can try a visual inspection, although it may be difficult to see. Alternatively, you can light a small piece of paper and observe the smoke; if it is drawn up the chimney, the damper is open. Always use the damper handle to adjust its position.