Get matched with top ceramic tile pros in Halfway, OR

The cost to install porcelain tile is about $1,930 on average. Porcelain tile prices range from $880 to $3,000 or more. The average cost tends to be higher than ceramic tile because porcelain tile is very durable. Porcelain tile rating also factors into the material cost. Tile ratings are as follows:

• Grade 0: Walls only

• Grade 1: Walls and light traffic floors

• Grade 2: Rooms with light traffic, but not kitchens or hallways

• Grade 3: Kitchens, hallways, and entryways

• Grade 4: Any area, interior or exterior

• Grade 5: Highest durability good for any area, interior or exterior

Yes, it’s possible to cut tile without a wet saw; instead, you can use an angle grinder, a glass cutter, a snap cutter, tile nippers, or a rotary tool with a tile-cutting blade. A manual tile cutter or snap cutter works well for the larger tiles that wet saws are typically used for, while smaller projects might just require nippers or a glass cutting wheel. If you’re working with large quantities of tile, however, power tools are best.

The best trowel for penny tile is a 3/16-inch-by-5/32-inch V-notch trowel. Because of the small size of the penny tile, you want a trowel with small notches that can lay a thin layer of mortar on the surface you’re tiling. If the notches are too wide, you risk applying too thick of a layer of mortar, and it can squeeze out between the penny tiles.

The easiest tile size to install is large tiles, and they’re easier to install than small tiles—the job is faster and simpler when there’s less placing, adhering, and grouting to do. However, when tiles get really big, they’re more difficult to handle, cut, and fit. Standard floor tile sizes are 12-by-12 inches, 18-by-18 inches, and 12-by-24 inches.