Get matched with top fireplace pros in Yale, OK

Yes, removing a chimney is a difficult and major undertaking. Chimneys often provide structural support to a home, so if it's a load-bearing structure, you'll need to take extra precautions to maintain your home's integrity. A project of this complexity typically requires a structural engineer, a masonry contractor, and a demolition crew. The removal process may involve taking the chimney out brick by brick from inside the walls. The cost for chimney removal can range from $2,000 to $10,000, depending on the job's complexity. Due to the difficulty and cost, some homeowners opt to remove the fireplace and seal the chimney at the top and bottom, sometimes also removing the visible exterior portion at the roofline.

Wood is classified as either hardwood or softwood. For firewood, hardwoods are generally the best choice as they tend to burn longer, hotter, and produce less smoke than softwoods. Recommended hardwoods include oak, hickory, maple, cherry, ash, beech, birch, elm, and walnut. Oak is a particularly good option as it's widely available, slow-burning, and doesn't produce much smoke or sparks. Some woods, like oak, hickory, and cherry, also emit a pleasant scent. It is best to avoid softwoods such as eucalyptus, poplar, and willow, as they create a lot of smoke and have a high moisture content that makes them difficult to light and burn efficiently.

A sneaky but important element to how long your new fireplace runs is choosing the right burner size. Avoid choosing a bioethanol fireplace with a small burner (less than two gallons) and opt for one that holds between two to four gallons for a longer burn time or else you’ll be stuck frequently refilling your fireplace.

A chimney liner is held in place by a top plate and attached top clamp, both of which should be included in most chimney liner kits. The top plate seals to the top of the chimney flue and attaches directly to the liner. This not only holds the liner in place but supports its weight in the chimney.