Get matched with top fencing pros in Medford, OK

When your rolls of silt fence join together, you’ll want to overlap them to make sure they’re still as effective at keeping water out without requiring fastening together. Overlap two sections of the silt fencing so that two sheets of fabric cover the span of two posts. If you want to fasten them together, you can staple them or use a zip tie, depending on whether your posts are metal or wood. 

The depth of the fence posts depends on the height of your fence. If you’re installing a 6-foot fence, then digging 2-foot-deep holes for the fence posts will help ensure a secure installation. However, if you’re installing an 8-foot fence, the posts will need to be deeper than 2 feet to support the structure properly. Also, consider how far apart the fence posts should be to provide adequate support.

The cheapest farm fences are typically wire fences, which cost less to install than traditional lumber fences. Barbed wire is one of the most inexpensive options due to its simple materials, making it a good choice for low budgets. It is suitable for confining docile animals in large spaces, as it provides a visual barrier and a mild deterrent. Other options like hog wire and woven wire fences are also cost-effective because they require less lumber than a full wooden fence. These types of wire fences are strong, long-lasting, and relatively easy to repair, though they are often considered less aesthetically pleasing than wood.

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.