Get matched with top fencing pros in Newkirk, OK

Most privacy fences are easy to install if you’re going with a DIY-friendly option like a wood fence, vinyl fence, or pallet fence. Since pallet fences come in the form of pre-constructed fence panels, they’re often considered the easiest privacy fence to install. Just get your fence stakes in the ground and slide the pallets onto them before securing them with scrapboard.

You’ll need to bury the garden fence about 1 foot underground. It’s tempting to save on materials by burying the fence just a couple of inches, but if you do so, determined pests will still be able to dig under the fence and access your plants. Burying your garden fence deep into the soil is an important step that allows you to attach a wire barrier to the fencing. 

Burrowing animals (like voles, moles, rabbits, and gophers) can’t dig or chew through this wiring, meaning that you’ll be keeping your prized petunias or your robust veggie garden from being eaten.

There are two things you can do to make a fence replacement easier—but keep in mind that easier doesn’t mean better. First, you can use a jack or some other type of machinery to pull the post out of the ground. If that’s not available, a digging bar can help.

Second, you can backfill the hole with gravel rather than creating a concrete footing. Keep in mind, gravel is less secure. You should only use it if you’re installing a lightweight fence or have heavier, clay soil.

When it comes to materials, wire fences are the cheapest option. The average cost for a 150-foot wire fence is $1,350. The next cheapest material is chain-link, followed by wood.

As far as the style of fence, smaller, less private fences are cheaper than large, elaborate fences that block your whole yard. That’s why split-rail fences are the cheapest option for wooden fences. They cost roughly $10 to $30 per linear foot.