You can make a pigtail with either thermoplastic high-heat-resistant nylon-coated (THHN) wire or non-metallic (NM) cable, often referred to as “Romex.” Each pigtail requires a neutral wire, a ground wire, and a live wire. The gauge of your pigtail wires must match the gauge of those on the device. 

Yes, a faulty or broken light switch can be a serious fire hazard. Malfunctioning switches, often due to loose connections, exposed wiring, or overheating, can cause sparking or arcing. If you hear a crackling, popping, or hissing sound when you use the switch, it indicates live electricity arcing inside, which is a significant hazard that can ignite nearby flammable materials. If you suspect your light switch is faulty, turn off the power to that circuit at the breaker and contact a qualified electrician to remedy the issue.

No, you shouldn’t immediately reset a tripped breaker. If you don’t know what tripped the breaker, resetting it and continuing the actions that set it off could pose a hazard. It also means your breaker will sustain greater damage if it trips again. If you know the cause of your tripped power, unplug faulty appliances or fix the issues, then reset it, and wait a few minutes before using electricity in that circuit.

Typically, a local home energy auditor is responsible for performing energy audits. A home energy auditor will conduct one of three energy audits designed by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) to determine the energy efficiency of your home. The auditor often provides analysis that can help guide changes and improvements to your home for better energy efficiency, giving recommendations as necessary.