Get matched with top electricians in Helena, OK

String lights require electricity, but not an excessive amount, especially when compared to other lighting fixtures. LED rope lights, for instance, consume around one watt per foot. Running six or seven light strings simultaneously should only cost you around $10 to $15 each month. You can save even more money by remembering to turn off your lights during daylight hours. 

A 60W LED bulb is likely labeled as “60W replacement” on the package—that’s because it provides about the same light output as a 60W incandescent bulb. In reality, it likely uses less energy—usually 15 watts or less. If that’s the case, then it’s perfectly fine to put a 60W LED bulb in a 40W socket. Your best bet is to read the package carefully. It will tell you the LED bulb’s actual wattage, and as long as it’s lower than the fixture, the bulb will be safe to use.

Yes, gas dryers still need electricity. While their heating system relies solely on natural gas to produce the heat that dries your clothes, gas dryers use electricity to power the lights and display screens on their interface, turn on the drum, and power any automatic moisture sensors inside the unit.

While not always necessary, wiring your circuit breaker in a certain way can ease both the installation process and use afterward. For starters, you’ll need to install the electrical panel so that the main service knockout aligns with the cable conduit. If they aren’t aligned, you may not have sufficient working space to finish running the wires. Using cable trays, on the other hand, gives you a bit more freedom to and flexibility in where and which direction you install the wires. At the end of the day, the power flow will be the same whether the cords run up or down.