Best plumbers near Calera, OK

Yes, you should leave outside faucets dripping in freezing weather to prevent frozen and burst pipes. While a drip doesn't always prevent freezing, ice is less likely to form and there's less pressure in your pipes, meaning they’re less likely to burst. You can also winterize your outdoor faucets, eliminating the need to run a drip.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

The water in your toilet tank refills after each flush. So if you see dirty water in the bowl, you should check the tank to see if it’s coming from there. A dirty toilet tank can be the result of sediment in the water itself—-after all, the water will sit in the tank between flushes and can cause the interior to change into a dingy color. Faulty toilet components, like an old flapper, corroded tank lever or chain, or damaged seals, can also lead to dirty water as the materials break down inside the tank. You can clean the toilet tank or change out the old parts to give it a fresh start.

Depending on the severity of the freeze and the method used, thawing frozen underground pipes can take anywhere from 30 minutes to several hours. Applying heat directly to the pipe using heat tape, infrared lamps, or hot water jetting can speed up the process. However, patience and careful monitoring are key to avoiding pipe damage.