Get matched with top fencing pros in Newbury, OH

Privacy fences in residential neighborhoods tend to stand between 6 and 8 feet tall, but local building code usually dictates the maximum height. Livestock fences that border large land plots range from 3 to 6 feet. Shorter, decorative fences, which are common in front yards, are around 3 feet tall, on average. Fence height also tends to vary by material, with wood fences usually sitting at 6 feet tall, and chain-link and wrought iron fences tending to sit at half that.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

There are many types of wood fencing that you can choose from. For split rail fencing, the most common wood types are cedar, pine, black locust, and chestnut. The best wood for you will depend on if you like the way a certain wood looks and the availability of the wood type in your area.

Most of the wood types you can find at your local home improvement store are good choices since they all have rot-resistant properties or are pressure-treated with pesticides. If none of the wood options speak to the look you’re going for, check out vinyl fencing.

You can weather a new wood fence by applying vinegar with steel wool as a way to fade some of the coloring. You may also find it easier to stain your entire fence a new color instead of trying to get newer fence boards to match an older one.