Get matched with top fencing pros in Lakeside Marblehead, OH

DIY installation is possible for small fences or sections. However, professional installation is recommended for larger projects to ensure proper alignment, stability, durability, correct post setting, and compliance with local zoning codes.

There are many types of wood fencing that you can choose from. For split rail fencing, the most common wood types are cedar, pine, black locust, and chestnut. The best wood for you will depend on if you like the way a certain wood looks and the availability of the wood type in your area.

Most of the wood types you can find at your local home improvement store are good choices since they all have rot-resistant properties or are pressure-treated with pesticides. If none of the wood options speak to the look you’re going for, check out vinyl fencing.

The bottom strand should sit between 12 to 15 inches from the ground. If you have a problem with small critters, you can aim for 8 inches. Three-strand fences should be 16 to 19 inches apart, four-strand fences should be 10 to 12 inches apart, and five-strand fences should be 8 and 10 inches apart.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.