Get matched with top garage pros in Gallipolis, OH

Garage doors that are not insulated can be a major source of heat loss. That’s why it’s essential to winterize your garage door with insulation and weather stripping to prevent heat loss and keep it warm more easily. Consult a local garage door installer if you need help determining the cause of your garage losing heat.

As with anything you buy, be wary of prices that seem too good to be true. Some low-cost flooring products can contain chemicals that release harmful VOCs (volatile organic compounds) in the form of fumes that can be inhaled or dust that can cause skin conditions.

Even good-quality products can be dangerous for DIY-ers who don’t take proper precautions. Always carefully read manufacturer instructions and wear the recommended protective gear when working with paints and other chemicals. You can also hire a local garage flooring pro with the experience and equipment needed to perform the installation safely with no lingering fumes or debris.

The best method for painting a garage door depends on the door's design and the finish you want to achieve. For the most professional-looking finish, especially on doors with panels or intricate details, a paint sprayer is an excellent choice. It can easily get into hard-to-reach places and provide a smooth, even coat.

If you don't have a sprayer, or if your door is flat, a combination of a roller and a brush is the most effective approach. Use a roller for the large, flat sections to cover the area quickly and efficiently. For the best results, experts recommend a roller with a nap between ⅜ and ¾ inches thick; natural fibers can also help ensure an even coat.

A brush is essential for handling the finer details. Use it to paint grooves, angles, small panels, and the edges of the door where you need more control.

Regardless of the tools you use, it's a good idea to step back after the main application to review your work and use a detail brush to touch up any missed spots.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.