If you have a concrete subfloor, you must secure the carpet padding with adhesive or glue. However, if you have a wooden subfloor, use staples instead. Removing a glued-down carpet can be difficult and time-consuming, so it’s best to avoid glue when possible.

Whether you install flooring before or after kitchen cabinets depends primarily on the type of flooring you are using. For materials like hardwood, tile, and sheet flooring, the best practice is to install the flooring first. This ensures the cabinets are installed at the correct height and on a stable surface. However, you should not install cabinets on top of floating floors, such as laminate or luxury vinyl plank (LVP). These types of flooring need room to expand and contract with temperature and humidity changes. Placing heavy cabinets on top can restrict this movement, potentially causing the floor to buckle and making the cabinets unstable. For floating floors, install the cabinets first and then lay the flooring up to them. Other reasons to consider installing cabinets before the flooring include saving money on materials (since you won't need flooring under the cabinets) and avoiding potential damage to your new floor during cabinet installation. Additionally, installing cabinets directly on the subfloor might prevent voiding your flooring's warranty.

Honestly, very few things in life are 100% anything—and that rule stands when it comes to waterproof flooring, too. Options like porcelain or ceramic tile are a lot closer to 100% waterproof than tiles and planks that have a fiberboard backing, like waterproof laminate or cork flooring. In all cases, it’s a good idea to wipe up wet spills as quickly as you can after they happen in order to avoid water damage.

The average cost to install an epoxy garage floor is $2,514, with typical projects ranging from $750 to over $5,716. On a per-square-foot basis, you can expect to pay between $3 and $12. Several factors influence the total cost, including the total square footage, required surface preparations, the type and thickness of the epoxy, design complexity, decorative options, and labor costs. For example, an epoxy floor for a one-car garage may cost between $720 and $2,900, while a two-car garage can range from $1,100 to $4,300. Adding decorative elements like flakes can cost about $10 per 250-pound bag, and choosing a metallic epoxy can increase the price to between $5 and $12 per square foot. With proper care and maintenance, a well-installed epoxy floor can last for 10 to 20 years.