Get matched with top tv mount installation pros in Columbus, OH

Finding a professional to mount your television to the wall is a little challenging because no licenses exist for this type of work. You could ask friends or neighbors for recommendations. Check out online reviews, too. Typically, though, almost any local handyman can do the work. A local electronics store or the place where you bought the TV may have a recommendation for you. A local framer or drywall installer might do the work for you as well. If you need an outlet installed for the new TV, an electrician may do both items for you.

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.

Yes, you can mount a TV on a brick wall as a DIY project. This process requires specific tools, such as a masonry drill and masonry bits, as a regular power drill is not sufficient for drilling into dense surfaces like brick. You will need to drill mounting holes directly into the bricks, not the mortar, to ensure there is enough support for the weight of the TV and its bracket. After drilling, use large plastic wall anchors or concrete screws to securely attach the TV mount.

The shorter the coaxial cable, the better. The further you run the cable, the more signal loss you'll experience. At 50 feet, you'll see significant signal loss, and by 100 feet, you'll experience at least a 30% drop in signal strength.