Best siding pros near Cleves, OH

Hardie board is more expensive than vinyl siding. Vinyl siding costs $3 to $12 per square foot, on average, with cost skewing toward the lower end of that range. Hardie board siding costs $7 to $18 per square foot, depending on the style, color, and trim. However, it lasts twice as long and often looks nicer, meaning you’ll see a higher bump in your home value and greater curb appeal from Hardie board.

Stucco is considered a type of cladding because it includes a built-in ventilation layer, a weatherproof membrane beneath that, and, often, a layer of insulation to improve building efficiency. The multiple layers of stucco—the scratch coat, the brown coat, and the finish coat—also create a more complex building membrane, so it’s more accurate to call it cladding. However, homeowners and contractors alike refer to stucco as siding.

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.

If you have stucco on the outside of your home, it’s technically considered cladding and not siding, but beyond that, it’s impossible to tell without a little digging. Without damaging the siding material, expose part of it to see if there’s an air gap between the siding and your exterior wall. If there is, you have cladding. If the siding is affixed directly to the exterior wall, you have a simple siding system.