Get matched with top garbage removal pros in Greig, NY

You may be able to install a garbage disposal on your own, especially if you're handy or have some experience with plumbing. However, if you have any concerns or want to make absolutely sure that the connections are installed correctly, you may be better off hiring a local garbage disposal installer to do the job. 

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.

Most garbage disposals have a reset button that can be triggered with a tool as simple and accessible as your index finger. That said, if you need to perform a more in-depth troubleshooting step, like manually moving the arms inside the unit or rotating the impeller plate, a hex wrench is the most common tool you’ll need. Most garbage disposals come with a hex wrench.

There are many maintenance and repair issues that lead to a malfunctioning garbage disposal. Regular clogs place wear and tear on the motors, leading to an eventual shutdown. Electrical issues at the breaker, wall outlet, or disposal itself can fry the unit. The most common cause is simply a worn-down motor. These motors can only handle so much use before powering down for good.