Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.</p></div>

What do most welders charge per hour?

• <div><p>Welders typically charge about <b>$65 to $150 per hour</b>, often charging a minimum fee to cover overhead and travel as applicable. Even if the job takes less than an hour, you’ll still pay the minimum charge to cover the welder’s transportation costs if they come to you. You may still pay a minimum price if you take your project to the welder, as they still have overhead of a workshop and materials to expense.</p></div>

Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Santa Ana Pueblo, NM

Q: How do you calculate welding costs?

• <div><p>The average cost to hire a welder is about <b>$300</b>, with an average rate ranging from <b>$65 to $125 per hour,</b> depending on their experience and the project type and size. Aside from labor costs, some other charges you&rsquo;ll need to pay include the cost of the welding material and the cost of the shielding gas that makes welding possible and safe. When you&rsquo;re interviewing welders for your work, you can ask for an estimate based on your project specifics. In some simple cases, like welding gas lines or common welding projects, local welders may charge a flat hourly rate with add-ons if necessary.</p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: What are the benefits of custom metal fabrication?

• <div><p>Custom fabrication ensures durability, design precision, and unique aesthetics tailored to your specific needs.</p></div>

Q: What household tool can cut a metal pipe?

• <div><p>Your typical household tools will not cut a metal pipe. To cut a metal pipe, you&rsquo;d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It&rsquo;s usually safer to let a pro cut a metal pipe, especially if you&rsquo;re not confident in your skills with a heavy-duty saw. </p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Santa Ana Pueblo, NM?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Santa Ana Pueblo, NM

*The Angi rating for Metal Fabrication And Restoration companies in Santa Ana Pueblo, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Santa Ana Pueblo, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on November 13, 2025

Reviewed in December 2020
Rocky Mountain Roofing did a superb job replacing my shingle roof with metal. They were informative, timely, and responsive. I can't recommend them highly enough.
Rocky Mountain Roofing Services LLC
Request a quote
Reviewed in January 2020
After almost 3 weeks of being told I’d get a quote I finally spoke with jolene. She promised that by the end of the day I would have it. The only thing I got by the end of the day was an email saying that they couldn’t take on my project at this time because it was to complicated. My project was...
Green Mountain Contractors Inc
Request a quote
Reviewed in July 2017
didn't want to drill through the metal, they made it happen! Panels look great onPerfect! Paul and Thomas make a dynamic team. Going from an asphalt shingle roof to a metal roof is not an easy task. They were very thorough! They explained every thing they were doing, as they went along! Careful...
EarthStar Energy Consultants, LLC
Request a quote
Reviewed in December 2016
Tech showed up withing specified time frame. Work took less than an hour. He spent the rest of the hour inspecting the rest of the house's plumbing. Informed us that that all looked ok and told us how to prevent roots from blocking the system in the future.
TLC Plumbing Heating Cooling Electrical
Request a quote
Reviewed in July 2016
Other locksmiths were unwilling to do any work on a metal door frame, but this locksmith had the deadbolt sliding into the door frame in a matter of minutes. The second lock was missing a pin, and again the problem was fixed in no time. I have never seen anyone work so quickly and effortlessly...
The Lock Shop
Request a quote
Reviewed in December 2014
The bottom line for me is that Christine is an excellent upholstery business who gave my lovely second hand sofa a much needed couch cushion update as the old cushions that came with it had lived a good life yet needed to be replaced with new ones in a fabric that was pet friendly. I received...
Christine Reisch Interiors
Request a quote
Reviewed in November 2014
Delivery trucks had been stolen, so the two men sent to deliver and set up had to put it on the top of a personal truck and wiggle it off onto a dolly. Scary. Once in, they were awesome explaining everything and getting it ready to use the same night. I did have trouble with well water and...
Dreamstyle Remodeling
Request a quote
Reviewed in April 2014
Ok, but not sure house is not mold free yet. I was not present during inspection but I talked to Sean and he assured me there was no real problem with mold. He was very professional and If I need to have place cleaned I would not hesitate to use 911 restoration.
GotMoldUSA
Request a quote
Reviewed in September 2013
Only complication was the power went out to our neighborhood prior to the job. But the job was done well and when the power was restored to the area, everything worked fine.
Libo Electric Inc
Request a quote
Reviewed in June 2013
Brad was fantastic! He came early, pinpointed the problem right away and fixed it on the spot. It took about 10 minutes and cost around $100. He's honest and professional, and his rates are extremely reasonable. I had called Just Sprinklers first and was told I had to replace the entire valve...
By The Yard Landscaping & Irrigation
Request a quote

Find Metal fabricators and restorers in Santa Ana Pueblo

MayDay Solutions LLC

5.00(

)

•Approved Pro

MayDay Solutions LLC

Customers say: Quick response

100 local quotes requested

1 years of experience

Thank you for your interest in MayDay Solutions! My name is Jason May, I was born and raised in Albuquerque. I studied and received my certifications in Welding in 2012 in Southern California where I met my now wife. We moved our growing family back to Albuquerque in 2021 to be closer to family. I have Welding experience since 2014 and specialize in custom gates, fabrication, handrails, gate & fence repair, and anything in between. Do you have a project that needs metal work? Send us an inquiry today. We are happy to answer any questions and help guide you to a successful project.

"What a pleasure to work with MayDay Solutions. They were easy to work with, did what they said they'd do, kept us informed of any changes or delays, and spent the necessary time to get the project done right. We couldn't be more pleased with the finished project. We highly recommend Jason, Chanel and MayDay Solutions."

Jody K on November 2025

"What a pleasure to work with MayDay Solutions. They were easy to work with, did what they said they'd do, kept us informed of any changes or delays, and spent the necessary time to get the project done right. We couldn't be more pleased with the finished project. We highly recommend Jason, Chanel and MayDay Solutions."

Jody K on November 2025

Get matched with top metal fabricators and restorers in Santa Ana Pueblo, NM

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Santa Ana Pueblo, NM?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Santa Ana Pueblo, NM

Find Metal fabricators and restorers in Santa Ana Pueblo

MayDay Solutions LLC

MayDay Solutions LLC

Alco

Alco

Parras contracting

Parras contracting

B D Worklin LLC

B D Worklin LLC

AE Custom Fab

AE Custom Fab

Functional Fabrication

Functional Fabrication

Rio Rancho Metal

Rio Rancho Metal

Open Range Ironworks, LLC

Open Range Ironworks, LLC

City Iron

City Iron

On-The-Fly Mobile welding & Repair

On-The-Fly Mobile welding & Repair

The Santa Ana Pueblo, NM homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Santa Ana Pueblo? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Santa Ana Pueblo Metal fabrication and restoration services on Angi who specialize in any of these tasks

Find Pros for other jobs in Santa Ana PuebloIf your Metal fabrication and restoration services job is complete, use Angi to find quality Pros in Santa Ana Pueblo for any number of jobs.