Get matched with top mattress cleaning pros in Red River, NM

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

An improper DIY roof cleaning could cause leaks by damaging the roofing material. Things like using too much water pressure on the shingles or applying a harsh cleaning solution could cause damage. If you do enough damage, you could harm the ability of the shingles or other roof materials to keep water out of your home.

Long-handled telescopic brushes are the best way to clean the outside of a house without a pressure washer. There are even special attachments for cleaning the outside of windows. Use a gentle cleaning solution for both the roof and siding to avoid harming the finishes. Be sure to rinse the area thoroughly with a garden hose after scrubbing.

To prep for metal roof painting, have a roof inspection conducted to determine the condition. Complete any repairs required before you paint. Remove the old paint on your metal roof, if any, remove rust and mold with a wire brush, and power wash the surface. Once the roof is clean and dry, start with a primer get painting.