Best epoxy flooring pros near Mescalero, NM

Sealing the concrete before tiling is recommended to help it stand up against any water that may seep through the tiles or grout. After thoroughly cleaning the concrete with TSP, priming with a concrete primer will seal the concrete. Check the label on the primer to make sure it is also a sealant and follow the manufacturer’s instructions for application.

Apply two coats of paint to a garage floor after priming for optimal results. The first coat serves as a base layer, providing adhesion and coverage. Allow the first coat to dry thoroughly before applying the second coat, typically after 12 to 24 hours. The second coat ensures even coverage and durability and enhances the floor's appearance. Additionally, applying two coats helps to create a more substantial barrier against stains, chemicals, and wear and tear, resulting in a longer-lasting finish. 

There are many benefits to painting a garage floor, especially if you use an epoxy floor coating . In general, paint makes your garage easier to clean. Since concrete is porous, it tends to absorb things like dirt, grime, mildew, oil, and grease. Paint—specifically epoxy-based paint—creates a barrier that helps you easily mop up the mess before it stains or is difficult to remove.

Resurfacing a garage floor takes about eight hours on average, with another couple hours over three days to do the epoxy. Epoxy goes on in three coats, with each coat taking 24 hours to dry and cure. You’ll need to keep foot and vehicle traffic off of your garage floor for around 4 days in total when replacing your garage floor, so be sure to plan ahead before you start. This is a great time to organize your garage since you’ll need to move everything out to apply the epoxy.