Get matched with top fire pit installation pros in Lovington, NM

No. Removing the cause of concern will only lead to deeper concern. You cannot use any fire-powered appliance like a fireplace or furnace without an escape route for the smoke and fumes. If you remove the flue intending to repair or replace it, you should only use the fireplace, wood stove, or furnace once the flue is in working order. If you cannot replace the flue you have removed, call a chimney repair professional immediately.

Your pilot light needs to be on whenever you’re using your furnace to heat your home. However, you might decide to turn it off during the summer months, when you don’t need heating. Doing this can save you a little bit of money on utility costs—just make sure you’re fine with relighting your pilot light (or hiring a professional to do it) when fall comes around and you’re ready to get cozy.

You should not attempt to disable a smoke alarm unless you’ve already activated a replacement unit. To stop a hardwired smoke alarm from beeping, reset the device or silence the alarm. If you’re removing a hardwired alarm, shut off the power, turn the unit counterclockwise to remove it from the ceiling, and disconnect the wiring.

Absolutely! Smoke alarms are lifesavers. According to the National Fire Protection Association (NFPA), per 1,000 reported home fires, homes without working smoke alarms have a death rate nearly twice as high as those that do have working alarms. So remember to ensure you have enough installed in your home and that they are working and in good shape.