Get matched with top marble and granite pros in Lordsburg, NM

Silestone® is a brand of quartz countertops; one isn’t necessarily better, but they have their differences. Silestone® costs slightly more than the average quartz countertop because you’re paying for the brand name and unique features. For example, Silestone® is often more sustainable than regular quartz because you can purchase varieties made with recycled materials. It also has antibacterial properties and design options some homeowners prefer. Plus, you can use it across your whole kitchen rather than solely for countertops.

Yes, in some instances, homeowners can have their heat-damaged quartz countertops repaired. However, it greatly depends on the severity. A pro can buff out minor discolorations. Epoxy kits are also available to fix minor cracks. Sadly, deep burns causing extreme resin damage may require a complete replacement.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.