Get matched with top marble and granite pros in Salem, NM

Q: Can you use car polish on marble?

• <div><p>You can use some types of car wax to polish marble floors, as long as the polish is designed for use on marble floors. Read the label and test the polish on a small area of the floor first to see how it interacts with the marble. Car wax can help fill in or buff away small scratches, while polishing the marble for extra shine.</p></div>

Q: How do you seal a cut countertop?

• <div><p>You should always seal cut countertops to prevent damage and to keep them looking their best. The right way to seal countertops depends on the type of material. For laminate and wood, apply epoxy or other specialty sealers by pouring it onto the countertop and letting it flow across the whole surface to the edges, guiding it with a paint stick or putty knife. You will need to move quickly so that it does not dry or harden before you are done. For stone countertops, use a sealant specially manufactured for your type of stone and apply it according to manufacturer directions. </p></div>

Q: Does a marble countertop need to be sealed?

• <div><p>Marble is a porous natural stone that needs sealant to minimize staining. Leaving this <a href="https://www.angi.com/articles/countertop-types-materials.htm">type of countertop material</a> sealant-free means any liquids left on the surface will quickly absorb into the stone, discoloring it and dulling the sheen. Dark or acidic liquids, like red wine, coffee, and lemon, are the worst culprits. </p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: What materials are cesspits made from?

• <div><p>Since cesspits must be watertight to prevent leakage and contamination, so they&rsquo;re typically constructed from one of a few tough materials. Most cesspits are made from fiberglass, concrete, polythene, or steel. Each of these materials carries certain advantages&mdash;fiberglass, for example, is resistant to corrosion but may be more prone to cracking if it&rsquo;s at high capacity.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your marble and granite service project in Salem, NM?

Select your specific project to find the pro for you.

Verified Reviews for Marble And Granite Service pros in Salem, NM

*The Angi rating for Marble And Granite Service companies in Salem, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Marble And Granite Service needs.

*The HomeAdvisor rating for Marble And Granite Service companies in Salem, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Marble And Granite Service needs.

Last update on September 07, 2022

Reviewed in September 2022
Brian and his workers were so professional and did a great job. His costs were very reasonable for the amount of work done.Old house needed new box to replace old type with round fuses and rewiring in house. . He got all permits and upgraded the service . We are in rural northern dona ana...
Lee's Electric
Request a quote
Reviewed in October 2021
Bo did a great job! This dryer was complicated.
Lucero & Sons Plumbing, Heating & Cooling
Request a quote
Reviewed in October 2021
Good work, good service, good price.
CLR
Request a quote
Reviewed in April 2021
They were very nice, but at one point they kept changing the schedule w/o letting me know. At one point it seemed like they did not want to do the job anymore.
ZNJ Communications Group, LLC
Request a quote
Reviewed in January 2019
This company came to the job site and quoted me a price . They came over after a few days and completed the job. Honest and professional. Happy with their job performance.
O. R. J Landscaping
Request a quote
Reviewed in November 2016
Great job getting rid of weeds that would have caused misery to our two dogs. I intend to emply their services again this spring to beautify our property. Well done!
Roadrunner Landscaping & Maintenance
Request a quote
Reviewed in December 2014
First response was very timely.
A-1 Appliance Repair
Request a quote
Reviewed in July 2013
I was in need of someone to come and do some clean up around my farm and home. It is almost impossible to find anyone in our area who is willing to do 'hard manual labor' but I saw the ad in the local paper. I called and he drove the 40 miles to see what I needed done. In two days he brought...
SBH Lawn Services & Maint
Request a quote
Reviewed in March 2013
They were very professional and efficient and were able to remove several difficult stains. All the furniture was handled carefully and put plastic protection squares on all the furniture bottoms to prevent bleeding onto the wet carpet. The house is 10 years old and the light colored carpets...
Las Cruces Carpet Cleaning
Request a quote
Reviewed in February 2012
They saw the problem right away, had to order the part, called to let us know the finish we needed wasn't in stock but we chose something close so we wouldn't need to wait 2 weeks. As soon as it arrived they called and were able to install it right away.
1 Call Plumbing & Construction, LLC
Request a quote

Find Marble and granite pros in Salem

KRCS Construction LLC

5.0(

)

Serving Salem, NM and surrounding areas

Approved

In business since 1998

Free estimates

Emergency services offered

"On time and professional! Definitely went above and beyond my expectations and stayed on budget!"

Response time1 day

Recommended by100%of homeowners

Request Quote

Home Pros Construction LLC

3.8(

)

Serving Salem, NM and surrounding areas

Approved

In business since 2017

Free estimates

Credit card accepted

Welcome to Home Pros Construction, your trusted partner for high-quality home remodeling and exterior upgrades. We specialize in enhancing your homes beauty, comfort, and value with professional craftsmanship and premium materials.\n\nOur services include replacement windows and doors featuring trusted brands like Andersen and Simonton, custom front door installations, durable stucco exterior upgrades, and bathroom remodels designed for modern living. Transform outdated tubs and moldy tile showers into beautiful walk-in showers with low-maintenance, grout-free surrounds.\n\nAt Home Pros, every project is completed by licensed, bonded, and insured installers who take pride in delivering exceptional results. We focus on clear communication, professional installation, and a smooth customer experience from consultation through final walkthrough. Your home is one of your biggest investments, and we treat it with the care and attention it deserves.

+69

99 neighbors recently requested a quote

Serving Salem, NM and surrounding areas

Approved

In business since 2001

Credit card accepted

Offers commercial services

"Very professional and affordable. Work was completed on time and clean up was superb. Highly recommend Beacon Homes!"

Response time2 days

21 neighbors recently requested a quote

Serving Salem, NM and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

29 neighbors recently requested a quote

Request Quote

A.C.E. Granite Innovations, LLC

4.8(

)

Serving Salem, NM and surrounding areas

In business since 2009

Free estimates

Warranties offered

"Great follow up. Responded quickly. qoute was quick and accurate. Installer were friendly fast and did a good job. Highly recommend them"

+28

Response time2 days

Recommended by100%of homeowners

Serving Salem, NM and surrounding areas

In business since 1982

Free estimates

Credit card accepted

"I have heard good things about the company so I called them and I was very pleased on how they presented themselves and the product that they have. They are wonderful, I would definitely recommend the product that they used. They were very knowledgeable about what things should be done on your home, after much consideration I said we should do it. They were very professional, on time, they were here everyday with a smile on their faces, very courteous and cleaned up after themselves."

Recommended by90%of homeowners

Serving Salem, NM and surrounding areas

In business since 2010

Free estimates

Emergency services offered

"It was okay. They were kind of messy. I had to do a lot of cleaning up after them. They were doing a lot of patching so they did a good job matching the existing texture and so on. I think there were 2 guys who came and they got to work and did the work."

+107

Recommended by82%of homeowners

Request Quote

Pluma Construction Systems, Inc.

5.0(

)

Serving Salem, NM and surrounding areas

In business since 1994

Credit card accepted

Offers commercial services

"Pluma was an excellent company to work with. Work was completed within 1 week of estimated time and included new windows and french door installation, replacement of 3 windows, retexture and paint ceilings, new flooring, new cabinets, new baseboards and painting throughout. Work was excellent and Julio was an amazing worker! He never did things that were less then satisfactory and often went the extra mile! My new kitchen, living area and laundry look incredible!! Overall fair value for work completed, will recommend to others and will likely hire for our future projects. Thank you!!!"

+112

Response time1 day

Recommended by100%of homeowners

Serving Salem, NM and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Request Quote

Horizon Granite and Cabinets - Las Cruces, New Mexico Facebook

5.0(

)

Serving Salem, NM and surrounding areas

In business since 2016

Free estimates

Offers commercial services

"All the work Vidal has done for has turned out beautiful. Vidal is extremely professional and his services are inexpensive. I have nothing but great things to say about Ray and the work he does!"

Response time1 day

Response rate100%

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 48

Marble and Granite questions, answered by experts

You can use some types of car wax to polish marble floors, as long as the polish is designed for use on marble floors. Read the label and test the polish on a small area of the floor first to see how it interacts with the marble. Car wax can help fill in or buff away small scratches, while polishing the marble for extra shine.

You should always seal cut countertops to prevent damage and to keep them looking their best. The right way to seal countertops depends on the type of material. For laminate and wood, apply epoxy or other specialty sealers by pouring it onto the countertop and letting it flow across the whole surface to the edges, guiding it with a paint stick or putty knife. You will need to move quickly so that it does not dry or harden before you are done. For stone countertops, use a sealant specially manufactured for your type of stone and apply it according to manufacturer directions.

Marble is a porous natural stone that needs sealant to minimize staining. Leaving this type of countertop material sealant-free means any liquids left on the surface will quickly absorb into the stone, discoloring it and dulling the sheen. Dark or acidic liquids, like red wine, coffee, and lemon, are the worst culprits.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Since cesspits must be watertight to prevent leakage and contamination, so they’re typically constructed from one of a few tough materials. Most cesspits are made from fiberglass, concrete, polythene, or steel. Each of these materials carries certain advantages—fiberglass, for example, is resistant to corrosion but may be more prone to cracking if it’s at high capacity.

The Salem, NM homeowners’ guide to marble and granite services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deane Biermeier
•
May 30, 2026May 30, 2026
How Much Does a Silestone Countertop Cost? [2026 Data]
Silestone® has long been a favorite of homeowners who like the look of quartz. Budget for your Silestone® countertop’s cost with this helpful guide.
Alison Kasch
•
Apr 5, 2026Apr 5, 2026
How Much Do Marble Countertops Cost? [2026 Data]
Marble countertops have yet to go out of style, and likely won't any time soon. This strong, durable, and stunning material melds with most kitchen, bathroom, and even dining room designs. But how much do marble countertops cost to install?
Angi
•
May 3, 2026May 3, 2026
How Much Does Cultured Marble Cost? [2026 Data]
Discover the true cultured marble cost for your next project. Learn about installation, size, labor, and ways to save on cultured marble.
Lauren Bongard
•
May 3, 2026May 3, 2026
How to Change the Color of Your Granite Countertops for a Brighter Kitchen
Hate your granite counters? Learn how to change the color of your granite countertops to refresh your kitchen and get a whole new look.
Mariel Loveland
•
Apr 10, 2026Apr 10, 2026
The Top 7 Types of Stone Countertops for Your Kitchen
From luxurious marble to trendy slate, this guide will show you the best types of stone countertops for your kitchen. Let’s dive in.
Catherine Hiles
•
Apr 9, 2026Apr 9, 2026
Pros and Cons of Granite Countertops
Granite countertops are popular in kitchens because they’re attractive, durable, and long-lasting. Learn about the pros and cons of granite countertops here.