Is sintered stone better than quartz?

• <div><p>Sintered stone and quartz are both low-maintenance materials resistant to water damage and scratching. However, quartz can be damaged by temperatures over 150°F, while sintered stone is heat-resistant up to 300°F. Both materials are comparable in cost, so ultimately, the decision will hinge on your preferences. </p></div>

What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Get matched with top marble and granite pros in Mimbres, NM

Q: Is onyx good for a countertop?

• <div><p><a href="https://www.angi.com/articles/onyx-countertops-pros-and-cons.htm">Onyx countertops have pros and cons</a>. If you seal it properly and take care not to damage it, it can make a good countertop surface. However, it's more often used in bathrooms, where it&rsquo;s less likely to sustain damage. Having an onyx kitchen countertop is possible, but you&rsquo;ll need to take extra care not to burn, stain, or otherwise damage the material.</p></div>

Q: How do I maintain repaired stone countertops?

• <div><p>Use a pH-balanced cleaner, avoid abrasive materials, and reseal porous stones like granite annually to maintain durability.</p></div>

Q: Can you put a hot pan on soapstone?

• <div><p>One of the primary benefits of a soapstone countertop is that the material is heat-resistant. You can put a hot pan on soapstone, and it won&rsquo;t scorch or crack. Despite being able to handle extreme heat, soapstone is much softer than granite, quartz and similar materials. This means that it scratches easily, so you should not prepare food directly on the surface.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your marble and granite service project in Mimbres, NM?

Select your specific project to find the pro for you.

Verified Reviews for Marble And Granite Service pros in Mimbres, NM

*The Angi rating for Marble And Granite Service companies in Mimbres, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Marble And Granite Service needs.

*The HomeAdvisor rating for Marble And Granite Service companies in Mimbres, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Marble And Granite Service needs.

Last update on November 24, 2025

Reviewed in November 2025
Marco Saucedo came to our home to give us an estimate on two sliding glass door for our home. One is oversized and I knew not a standard size. Marco answered all of our questions and made the process easy. We are so happy with the service we received.
Window World Las Cruces
Request a quote
Reviewed in June 2024
Alonso and his AR Construction crew did a fantastic job. They were efficient and friendly, and cleaned up when they were finished. I will hire them again.
A.R. Construction LLC
Request a quote
Reviewed in October 2023
Mark was the greatest. He showed up on time, and he and his crew got the job done in no time. He takes pride in his work. And getting you what you want is his goal. I love my new lighting in my craft shed. I'll be calling him back for more things on my wish list. So call Mark, you'll be glad...
Ambrose Electrical Design and Services, LLC
Request a quote
Reviewed in September 2021
They made moving easy! They provided a quick bid, careful loading, and excellent customer communication. We would definitely hire them again.
Summit Junk Removal . com
Request a quote
Reviewed in August 2021
I do not think APT does the actual moving, they are more of a coordinator. I could be wrong, but that is how it looks. The initial contact was good and helpful, but after that, I have had delayed responses to my calls. Using professional movers is not cheap, and the price kept changing.
Moving APT
Request a quote
Reviewed in May 2020
Richard is very thorough and always dots every i and crosses every t. He is an excellent craftsman.
American Interiors, Inc.
Request a quote
Reviewed in April 2019
Helped us out in a last minute inspection situation on the sale of our home! We live fairly far out and it wasn’t a problem. Very professional and pricing was reasonable.
730 South Exteriors, Inc.
Request a quote
Reviewed in January 2019
Very professional and honest. Henry does quality work and is dependable. I have multiple properties and I use him for every construction need.
Hmrcontracting
Request a quote

Find Marble and granite pros in Mimbres

A.C.E. Granite Innovations, LLC

4.8(

)

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Mimbres, NM and surrounding areas

In business since 2009

Free estimates

Warranties offered

"Came out when called and gave me an estimate I am still gonna get a couple more estimates from others."

+28

Response time2 days

Recommended by100%of homeowners

Request Quote

SMRT Construction Services Inc.

3.3(

)

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Mimbres, NM and surrounding areas

In business since 1984

Free estimates

Emergency services offered

"It went fine. He was on time, got the work done and we were pleased with the quality.
"

Recommended by58%of homeowners

Request Quote

Pantoja Granite

New to Angi

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Mimbres, NM and surrounding areas

Free estimates

Emergency services offered

Warranties offered

I like to see clients with happy production, I been working since i was a kid with my parents. I started on onion fields, Chile, cabbage, and so on. I worked framing, concrete, painting, landscaping, tree/palms/yards, flooring, remodeling for like 12 years. And granite countertops been doing like for 5 years, I was the fabricator and installer for Ace Granite located in cruces. \nI'll guarantee you good, clean No exceptions.

+17

Request Quote

Stone Specialists

New to Angi

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Mimbres, NM and surrounding areas

In business since 2024

Free estimates

Credit card accepted

I pride myself on my professionalism, as well as my ability to complete every job to the homeowner's total satisfaction. I never leave a job unfinished, or a homeowner not 100% satisfied with my level of service - Call today!

Request Quote

Arias Countertops, LLC

New to Angi

Tile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - InstallTile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - Install - For BusinessTile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - Repair

Serving Mimbres, NM and surrounding areas

In business since 2003

Free estimates

We are a locally owned and operated company with 15 years of experience. We pride ourselves on the quality of our work, as well as our commitment to outstanding results. We look forward to building lasting relationships with our clients and guarantee your satisfaction.

Response time2 days

Request Quote

Build Art Services

New to Angi

Tile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - InstallTile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - Repair

Serving Mimbres, NM and surrounding areas

In business since 2023

Free estimates

Offers commercial services

Build Art Services is committed to excellence in every aspect of our\nbusiness. We uphold a standard of integrity bound by fairness, honesty,\nand personal responsibility. Our distinction is the quality of service\nwe bring to our customers. Accurate knowledge of\nour trade combined with ability is what makes us true professionals.\nAbove all, we are watchful of our customers' interests and make their\nconcerns the basis of our business.

Request Quote

Benjamin's flooring

New to Angi

Tile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - Install - For Business

Serving Mimbres, NM and surrounding areas

In business since 1988

Free estimates

tbd Trade Exp 30 Years

Request Quote

Business Environments

New to Angi

Tile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - Install - For Business

Serving Mimbres, NM and surrounding areas

In business since 2020

Free estimates

Credit card accepted

Family owned and operated since 1980. We are dedicated to providing our clients with the very best in quality for all of your flooring installation needs. We'll help you select the most fitting and beautiful home interiors - from a wide variety of flooring options, window treatments and more! Our distinctive service includes professional measuring, experienced installation and stylish design, all provided with a local flair since we're independently owned and operated. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.\n\n

Request Quote

Robert Miller

New to Angi

Tile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - Install - For Business

Serving Mimbres, NM and surrounding areas

In business since 2006

Free estimates

Robert Miller has been in business since 2006n and is your locally owned and operated flooring company. We have many years of experience to give you confidence that we are your number one choice for your next commercial or home flooring project. Call us today and we look forward to your future business!

Request Quote

Willy J HandyMan

New to Angi

Tile: Natural Stone (Granite, Marble, Slate, Quartz, etc) - Repair

Serving Mimbres, NM and surrounding areas

In business since 2014

Free estimates

Credit card accepted

We have the experience and we are committed to providing quality workmanship and superior customer service on all our applications. We at Eagle Fencing strive to maintain our reputation as a high quality, very service oriented company with our main focus being customer satisfaction.

Request Quote

Showing 1-10 of 11

Marble and Granite questions, answered by experts

Onyx countertops have pros and cons. If you seal it properly and take care not to damage it, it can make a good countertop surface. However, it's more often used in bathrooms, where it’s less likely to sustain damage. Having an onyx kitchen countertop is possible, but you’ll need to take extra care not to burn, stain, or otherwise damage the material.

Use a pH-balanced cleaner, avoid abrasive materials, and reseal porous stones like granite annually to maintain durability.

Sintered stone and quartz are both low-maintenance materials resistant to water damage and scratching. However, quartz can be damaged by temperatures over 150°F, while sintered stone is heat-resistant up to 300°F. Both materials are comparable in cost, so ultimately, the decision will hinge on your preferences.

One of the primary benefits of a soapstone countertop is that the material is heat-resistant. You can put a hot pan on soapstone, and it won’t scorch or crack. Despite being able to handle extreme heat, soapstone is much softer than granite, quartz and similar materials. This means that it scratches easily, so you should not prepare food directly on the surface.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The Mimbres, NM homeowners’ guide to marble and granite services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Alison Kasch
•
Apr 5, 2026Apr 5, 2026
How Much Do Marble Countertops Cost? [2026 Data]
Marble countertops have yet to go out of style, and likely won't any time soon. This strong, durable, and stunning material melds with most kitchen, bathroom, and even dining room designs. But how much do marble countertops cost to install?
Angi
•
May 3, 2026May 3, 2026
How Much Does Cultured Marble Cost? [2026 Data]
Discover the true cultured marble cost for your next project. Learn about installation, size, labor, and ways to save on cultured marble.
Deane Biermeier
•
May 30, 2026May 30, 2026
How Much Does a Silestone Countertop Cost? [2026 Data]
Silestone® has long been a favorite of homeowners who like the look of quartz. Budget for your Silestone® countertop’s cost with this helpful guide.
Deirdre Sullivan
•
May 3, 2026May 3, 2026
Marble vs. Granite Countertops: Which Material Is Better?
Choosing a countertop material is a big decision. We break down the pros and cons of marble vs. granite countertops to help you decide.
Deirdre Sullivan
•
Apr 10, 2026Apr 10, 2026
Marble Countertop Pros and Cons
Want to cook and dine in the lap of luxury? Consider these marble countertop pros and cons to learn if they are a good fit for you and your home.
Lawrence Bonk
•
May 3, 2026May 3, 2026
Engineered vs. Natural Stone Countertops: Which Is Best for Your Kitchen?
Are you weighing engineered stone vs. natural stone countertops? Both offer many of the same benefits, but there are differences in price, durability, and appearance.